The world’s fastest EMC/EMI diagnostic system has been reinvented to assist high-density board designers to visualize the root causes of potential EMC and EMI problems during pre-and post-EMC compliance testing.
EMScannerR enables the PCB and design engineers to diagnose EMC/EMI problems between 150 kHz and 8 GHz. EMScannerR provides 8 levels of resolution (60 microns – 7.5 mm).

EMScanner is a self-contained very-near-field scanning device that connects to a spectrum analyzer or desktop PC running on a copy of EMScanner Software.
The EMScanner system operates from 150 kHz to 8GHz and delivers repeatable & reliable results that pinpoint the cause of a design failure in seconds.
With EMScanner design teams can personally test their designs without having to rely on another department, test engineer, or time-consuming off-site testing. After diagnosing even an intermittent problem, the engineer can implement a design change and retest, and the results provide concrete verification of the effectiveness (or not) of the design change.

EMScanner diagnostic capabilities allow design teams to reduce testing time by more than two orders of magnitude. Users have also documented fifty percent reductions in design cycle times.

The Pendulum/Detectus series of EMC-Scanners are powerful pre-compliance tools for measurement and analysis of Electro-Magnetic Interference (EMI). The Scanners feature repetitive high-resolution scanning of emission (and optionally also immunity) down to 25 μm steps. You can scan even inside an IC (option)