Discover a wide selection of Ultra High Performance Oscilloscopes

Standard:

- Passive Intermodulation (PIM) Analyzer
- Battery Operated: >3 hour
- 20 dBm (0.1 Watt) to 46 dBm (40 Watt)
- Field-proven design: Rugged, compact, daylight viewable display
- Supported by Multiwave Smart Aligner Android application
- Compatible with SweepMasters SkyBridge Tools cloud-based trace management tool
- Standard three-year warranty (battery one-year warranty)

PIM Analyzer measurements:

- PIM vs. Time
- Swept PIM
- Distance-to-PIM (DTP)
- Noise Floor

- Compact, secure DC power supplies for space-constrained labs and production
- 40 single-output models
- 1.5 kW half-rack and 3.4 kW full-rack units—both only 1U high
- Integrated voltage and current measurements up to 600 V / 340 A
- Power flexibly with single-phase 100–240 VAC universal input on 1.5 kW models
- Support globally with single- or three-phase 200–240 VAC, and three-phase 380–480 VAC input on 3.4 kW models
- Optional Removable SD Card

High-power, high-density regenerative DC electronic loads
- Provide voltage options of 80 V, 500 V, and 800 V, with current sinking up to 240 A for broad application coverage
- Offer a wide 2,000 W to 12,000 W power range to match small-scale to high-power test requirements
- Maximize rack efficiency with industry-leading compact 1U or 2U designs
- Save valuable rack space with stackable parallel connections, up to 16 units
- Cut operational costs by regenerating power back to the grid

- Frequency range from 30 kHz to 4/8/18/26.5 GHz
- One-port cable and antenna measurement with basic instrument
- S-parameter (S11, S12, S21, S22) measurement with basic instrument
- 100 dB (typ.) dynamic range for filter and antenna isolation measurements
- Factory calibration over entire frequency range
- Built-in receiver step attenuator to increase port input power range linearity
- Built-in DC voltage supply (bias) for active components such as amplifiers

- 100 kHz to 4, 6, 12, 20, 40 GHz
- Ultra-fast switching: <100 ns within mod BW, as fast as 2.6 µs (4 GHz), 3.1 µs (6 to 20 GHz), 5.9 µs (40 GHz)
- Low phase noise: -142 dBc/Hz at 1 GHz, 10 kHz offset; -113 dBc/Hz at 10 GHz, 10 kHz offset
- Harmonics: < -30 dBc; Non-harmonics: -50 dBc at 10 GHz
- Standard Digital vector modulator: IQ BW 400 MHz (16bit)
- Keysight Signal Studio and IQTools Waveform Creation Support
- Internal digital baseband generator: Sample Rate up to 500 MHz, 512 MSa IQ memory
- FCP for IQ-data streaming, 125/250 Msa/s
- Ext. analog I/Q inputs: 50 MHz
- Single-channel model AP5041A: ½ 19” width, 2U enclosure, AC wide range powered (90 W), 7.5 kg
- Multi-channel model AP5042A: Up to 4 independent channels in a 2U rack-mount chassis, < 350 W, 20 kg
- Phase coherent, phase coherent switching
- Multi-device waveform/trigger synchronization: 6 GHz clock IN/OUT

- Provide voltage options of 80 V, 500 V, and 800 V, with current up to ±240 A for broad application coverage.
- Offer a wide 2,000 W to 12,000 W power range to match small-scale to high-power test requirements.
- Operate seamlessly in two-quadrant mode to function as both a power source and regenerative load.
- Maximize rack efficiency with industry-leading compact 1U or 2U designs.
- Save valuable rack space with stackable parallel connections, up to 16 units.
- Cut operational costs by regenerating power back to the grid.
- Accelerate battery testing with a built-in waveform generation function.

- Frequency range in cable and antenna analyzer mode from 2 MHz to 3 GHz or 4 GHz, upgrade via keycode
- Frequency range in spectrum analyzer mode from 5 kHz to 3 GHz or 4 GHz, upgrade via keycode
- One-port model features: DTF, return loss, VSWR and cable loss measurements
- Two-port model additionally features:
– Two-port transmission measurement
– Spectrum analysis
– Interference analysis
– Signal strength mapping
– Modulation analysis
– Advanced gated trigger measurements
– EMF measurement application

- Frequency range from 100 kHz to 3.6 GHz or 8 GHz
- 100 dB (typ.) dynamic range for filter and antenna isolation measurements
- Factory calibration over entire frequency range
- Built-in DC voltage supply (bias) for active components such as amplifiers
- Power meter option
- Saving of measurement results on SD memory card or USB memory stick

- 100 MHz to 1 GHz bandwidth
- 4 and 8 channel Models
- Up to 5 Gsample/s sample rate
- 125 Mpoints per channel standard memory
- 12-bit ADC at all sample rates
- 18-bit architecture with HD mode
- Precise digital trigger

AC RIPPLE:

- Frequency range: 10 Hz to 200 kHz
- Voltage/Current: Up to 50 Vp, 60 Ap
(Higher current options available)
- Adjustable ripple current limit

DC:

- Output voltage: Up to 1000V
- Power/Current: Up to 60 kW, 160A DC
(Higher voltage options available)
- Adjustable DC current limit
- Bi-directional DC capability

- Maximum dynamic range: –70 dBm to +45 dBm
- Frequency range: DC to 170 GHz
- More than 50000 readings/s
- Flexible operation with R&S®NRX base unit, laptop/PC and many Rohde & Schwarz instruments
- Control and monitoring via LAN and USB
- Easy LAN operation from a web browser
- R&S®NRPxxS(N) for widest dynamic range
- R&S®NRPxxT(N) for highest accuracy
- R&S®NRPxxA(N) for EMC applications

- Intuitive operation with touchscreen based GUI
- Supports up to four R&S®NRP and R&S®NRQ6 power sensors
- Supports all sensor-dependent measurement functions
- Optional high-precision CW and pulse mode reference source module
- Optional power reflection measurements with R&S®NRT-Zxx sensors

- Measurement range: DC to 100 kHz
- Digit resolution: up to 6½ digits
- Basic DC accuracy: 0.0075%
- Up to 200 readings/s
- Comprehensive measurement and mathematical functions.
- Long-term data logging to CSV format directly via USB flash drive
- Resolution: 100 nV, 10 nA, 0.1 mΩ, 0.1 pF, 1 Hz, 0.1°C

Designed for the most demanding EMC, aerospace, defense, and industrial applications, this new range of solid-state Class A amplifiers delivers:

- Exceptional linearity for high-fidelity signal reproduction
- High power output up to 1000W across 80 MHz – 1 GHz
- Scalable bandwidth when combined with CBA 4G, 6G, and 8G series – extending coverage up to 8 GHz
- Advanced thermal management and energy-efficient design
- Robust reliability even under severe VSWR conditions

- Frequency range from 5 kHz up to 44 GHz
- Tracking generator with frequency range from 30 kHz to 44 GHz (models .23/.36/.54)
- Frequency extensions via keycode
— From 5 kHz down to 100 Hz (applicable to models .06/.13/.26/.23/.36/.44/.54, with R&S®FPH-B29 option installed)
— From 2 GHz to 3 GHz or 4 GHz (model .02)
— From 6 GHz to 8 GHz (model .06)
— From 13.6 GHz to 20 GHz (models .13/.23)
— From 26.5 GHz to 31 GHz (models .26/36)
- Spectrum analysis for e.g.
— Mobile communications
— Radar and satellite communications
— Broadcasting
- Solid RF performance
— DANL: typ. –163 dBm (10 MHz to 3 GHz, preamplifier on)
— TOI measurement: +10 dBm (f = 2.4 GHz)

- 30 MHz to 200 MHz Frequency Range
- Maintains Low SWR (<3:1, Typicallyv1.5:1) Across Frequency Range
- Achieves 200 V/m at 1 m from the Fundamental for MIL-STD-461G (and H Draft) RS103 Compliance
- Auto-tunes Each Element for Optimal Frequency and Polarization Performance (with TILE!™ Software)
- Reduces Amplifier Load and Harmonic Emissions by 25+ dB
- Enables Fully Automated, Hands-free Tuning with Stored Profiles (with TILE! Software)
- Boosts Test Speed, Accuracy, and Repeatability
- Supports DO-160 and ISO 11452‑2 Test Configurations

- Broad frequency range: from 100 kHz to 20 GHz
- Time domain and distance-to-fault options for deeper analysis of filters and cables
- Compact standalone vector network analyzer with fully integrated PC
- Fast measurement speeds
- Innovative user interface and wide 10.1" multi-touch display
- Windows 10 operating system
- Support of calibration units

- Supports more than 30+ modules (including DC sources, electronic loads, bidirectional power supply, SMU).
- Up to 8 modules can be installed (depends on power), separate control and solation between channels
- Supports master-slave parallel connection between 2 modules to extend power*1
- Graphical operation interface with guided menus, significantly enhancing ease of use
- Supports LIST programming, sequence editing, battery testing/emulating, user-defined waveform and correction scanning, etc
- Built-in EIS (Electrochemical Impedance Spectroscopy) capability (IT2705 with IT27814 SMU module)
- Integrated Ah/Wh statistics, automatically recording regenerative energy
- Flexible display modes: Meter / Scope / Data Logger
- Minimum data logging interval of 20 μs
- Web control supported, allowing full functionality through a standard browser
- Standard interfaces: USB / LAN / CAN / Digital I/O, with free control software PV2700 included

*1 IT27814/IT27814E can be parallel connection only under CC mode.

- Max. Ripple Current: 100Ap – 600Ap
- Max. Ripple Voltage: 0 – 150Vp / 300Vp-p
- Frequency Range: 150 Hz – 300 kHz
- Supported DC Voltages: 0 – 1200V, or 2000V in bridged configuration
- Data Gathered: Tracks and reports Voltage, Current, and Impedance
- Rugged: Protected against all kinds of DUT failure (including failure to a short when DUT under full load)
- Compatibility: Most HV Standard DC power supplies

- Frequency range 9 kHz to 3 GHz or 6 GHz
- Resolution bandwidths 10 Hz to 3 MHz
- High sensitivity (< –141 dBm (1 Hz), with optional preamplifier < –161 dBm (1Hz))
- High third order intercept (> 10 dBm, typ. 15 dBm)
- Low measurement uncertainty (< 1 dB)
- Internal tracking generator (model .13/.16)