Go Back

L1-500/690V — PMM Narda Safety Test Solutions S.r.l.
*9 kHz to 30 MHz frequency range
*Up to 300 A (continuous); 500 A (20 min.) rated output current
*Suitable for DC to 60 Hz power lines
*Built-in, selectable 250 μH coil (choke)
*Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15, MIL-STD 461F
*Fan air cooling
*Stackable up to four units in wheeled rack (see data sheet L3-500)
*Powering the EUT
*EUT termination to a standardized impedance with respect to ground
*Couples the measuring receiver to the disturbance generated by the EUT
*Decouples the measuring receiver from unwanted RF signals from the power line
*Up to 300 A (continuous); 500 A (20 min.) rated output current
*Suitable for DC to 60 Hz power lines
*Built-in, selectable 250 μH coil (choke)
*Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15, MIL-STD 461F
*Fan air cooling
*Stackable up to four units in wheeled rack (see data sheet L3-500)
*Powering the EUT
*EUT termination to a standardized impedance with respect to ground
*Couples the measuring receiver to the disturbance generated by the EUT
*Decouples the measuring receiver from unwanted RF signals from the power line
More Details
CISPR-16/22 Single line LISN 300 (500) A, 690 V, 50 Ohm//(5 Ohm+50 µH) with 250 μH Choke or Bypass. 9 kHz-30 MHz. The L1-500 is a single line LISN able to support up to 500 ampere. Four modules L1-500, inside a rack on wheels, assemle the L3-500, in the picture. The L3-500 ia a three line V-network with an equivalent circuit of 50 ohm // (5ohm + 50μH), suited to perform measurements on conducted interference in the frequency range from 9 kHz to 30 MHz. Designed according to criteria of cheaply and compactness it can be used together with every EMI receiver or spectrum analyzer.
More Details: https://workdrive.zoho.com/file/krmsz2f78970d10fc4e81bee1de00bcfbc4a5










